3500/60 Temperature Monitor

Overview The bently nevada 3500/60 Temperature Monitor integrates temperature protection into the Bently Nevada 3500 machinery protection rack. By conditioning RTD/TC signals and converting them to engineering units, it drives alarm logic for trips/interlocks and supplies high-quality data to System 1 so you can correlate heat with vibration, process changes, and machine state. Measurements & Inputs Sensor types: Common RTD (e.g., Pt100; 2/3/4-wire) and TC (Type K/J/E/T, etc.) Engineering units: °C/°F with linearization and scaling Per-channel setup: Range, filtering, and alarm strategy are independently configurable Protection & Alarming Programmable Alert/Danger thresholds with delays and latching options Time-stamped events to the rack—tie to relay logic for shutdowns/interlocks Designed to complement API-class protection philosophies alongside vibration monitors Diagnostics & System 1 Publishes temperature trends to System 1 (via rack interface, e.g., 3500/22M TDI) Correlate temperature with vibration/phase/process for faster root-cause analysis Supports reports, alarms history, and maintenance planning Integration & Operation Hot-swappable monitor; front LEDs indicate OK/fault/alarm Configured via 3500 Rack Configuration Software; remote work through System 1 per site standard Works with existing 3500 monitors (40M/42M/44M, etc.) in mixed racks Compatibility & Ordering Notes Confirm sensor model, wiring (RTD 3/4-wire preferred), ranges, and ambient conditions Share rack BOM/slot map and System 1 version to verify compatibility Provide cable lengths and termination details to avoid measurement drift/noise Typical Applications Bearing and housing temperature on turbines, compressors, large motors/generators Lube-oil and coolant circuits monitoring Seal and case temperature protection in critical rotating assets What’s Included (this listing) 3500/60 Temperature Monitor (module only) Note: Sensors, I/O modules, rack, and cabling are quoted separately Related modules: – 3500/22M TDI  – 3500/40M Proximitor  _ 3500/15 AC/DC FAQ Q1: Which sensors are supported? RTDs (e.g., Pt100) and common thermocouples (K/J/E/T…). We’ll confirm per your sensor list. Q2: Does it provide protection alarms? Yes—Alert/Danger with delays/latching feed the rack’s relay logic for trips/interlocks. Q3: Can I trend data in System 1? Yes—temperature values are logged/trended in System 1, enabling correlation with vibration. Q4: RTD wiring recommendation? Use 3-wire or 4-wire RTD wiring for better accuracy and lead compensation. Q5: Is the module hot-swappable? Yes—per site procedures, the 3500/60 can be replaced without powering down the rack. Call to Action Not sure about RTD vs TC, ranges, or wiring? Send your sensor list and rack BOM—Seven Star LLC will validate inputs, confirm compatibility with your 3500 system, and quote availability/lead time with the best regional pricing.